[Free] 2018(June) Dumps4cert Microsoft 70-680 Dumps with VCE and PDF Download 241-250

Dumps4cert.com : Latest Dumps with PDF and VCE Files
2018 May Microsoft Official New Released 70-680
100% Free Download! 100% Pass Guaranteed!

TS: Windows 7, Configuring

Question No: 241 – (Topic 3)

You have a computer named Computer1 that runs Windows 7.

You plan to migrate the user state on Computer1 by using User State Migration Tool

(USMT) 4.0.

You need to identify which user documents will be included in the migration. What should you do?

  1. Run Usmtutils.exe and use the /ec option.

  2. Run Sysprep.exe and use the /audit option.

  3. Run Loadstate.exe and use the /v:12 option.

  4. Run Scanstate.exe and use the /genmigxml option.

Answer: D Explanation: ScanState

You run ScanState on the source computer during the migration. You must run ScanState.exe on computers running Windows Vista and Windows 7 from an administrative command prompt. When running ScanState on a source computer that has Windows XP installed, you need to run it as a user that is a member of the local administrators group. The following command creates an encrypted store named Mystore on the file share named Migration on the file server named Fileserver that uses the encryption key Mykey: scanstate \\fileserver\migration\mystore /i:migapp.xml /i:miguser.xml

/o /config:config.xml /encrypt /key:quot;mykeyquot;

/genmigxml: path to a file This option specifies that the ScanState command should use the document finder to create and export an .xml file that defines how to migrate all of the files on the computer on which the ScanState command is running.

Question No: 242 – (Topic 3)

You have a computer that runs Windows 7.

You need to configure system image backups to meet the following requirements:

->Automatically create a system image every day without user intervention

->Retain multiple copies of the system image

Which type of backup destination should you use?

  1. External hard disk drive

  2. Network location

  3. USB flash drive

  4. Writeable DVD

Answer: A

Explanation: Explanation/Reference:

Backup And Restore in Windows 7 supports backing up data files to CD-ROM, DVD-ROM, hard disk (including VHD files), or a network location. You can use Backup And Restore to write a System Image backup to an internal hard disk drive, an external hard disk drive (if formatted with the NTFS file system) and a network location. You cannot use Backup And Restore to write a System Image backup to a USB flash drive, a writable DVD, or a tape drive. You need to schedule client computers that store important data for automatic backup. After you first configure automatic file backup using the Backup And Restore console, Windows 7 regularly backs up your files. The first time a backup is performed, a full backup is done, including all important user documents. Subsequent backups are incremental, backing up only changed files. Older backups are discarded if the disk begins to run out of space.Scheduling Backups with the Backup And Restore Console Windows 7 Backup uses shadow copies to take a snapshot of your files, allowing the backup to completely back up files even if they are open. Backups are configured and scheduled by using the Backup And Restore console under System And Security in Control Panel. You can select the following types of backup destination: An external hard drive External hard drives are more expensive to purchase than internal hard drives, although you need to balance this against the cost of fitting the internal drive. They can be removed and stored in a secure location. However, they are typically slower than internal hard drives and tend to be less reliable, mainly because they are by default formatted using FAT rather than NTFS. You cannot use an external hard drive for a System Image backup unless you convert its filing system to NTFS. Because it is easily removable, it is more likely that an external hard drive will be missing when a scheduled backup is required.

Network locationIf your computer is short of disk space, you can back it up to a network location on another computer or network storage. Note that this is not the same as the situation in a production environment, where users’ Documents libraries are stored on a file server and an administrator backs up the file server. You can save your backups on a network location only on computers running Windows 7 Professional, Windows 7 Ultimate, and Windows 7 Enterprise, and you need to provide credentials so that Windows Backup can access the network. Bear in mind that you can save your backups on a network location only on computers running Windows 7 Professional, Windows 7 Ultimate, and Windows 7 Enterprise.USB flash drivesFlash drive memory is considerably less expensive and flash drive devices support much more memory than they did three or even two years ago. Nevertheless, they typically support a lot less memory than hard drives and

quickly fill up if you needed to keep copies of older backups. You cannot save System Image backups to flash memory. A flash drive must be able to hold more than 1 GB if you want to save a backup on it. Flash drives can be stored offsite and are small and easy to carry. They are also easy to lose.

Question No: 243 – (Topic 3)

You have a computer that runs Windows 7. The computer contains a folder named C:\data. You use Advanced Sharing to share C:\data by using the default share permissions.

When a user tries to access the share over the network, he gets an quot;Access is Deniedquot; error message.

You need to ensure that the user can access the share. What should you do?

  1. Allow file and printer sharing through Windows Firewall.

  2. Change the network location from a Public network to a Home or Work network.

  3. From the Security settings of the folder, assign the user the Read NTFS permission.

  4. From the Advanced Sharing settings of the folder, assign the user the Read share permission.

Answer: C Explanation:

Advanced Security Settings Properties Page – Permissions Tab

You can add additional resources, groups or users to have explicit NTFS permissions to access this object, or you can edit or remove the NTFS permissions granted to a resource, group, or user on the object. Inherited permissions are those that are propagated to an object from a parent object. Inherited permissions ease the task of managing permissions and ensure consistency of permissions among all objects within a given container.

Question No: 244 – (Topic 3)

You have a computer named Computer1 that runs Windows 7. Computer1 has a shared printer.

You need to configure Computer1 so that only Administrators are authorized to shut down the computer.

What should you do?

  1. From User Accounts, modify the user profiles settings.

  2. From User Accounts, modify the User Account Control (UAC) settings.

  3. From the local computer policy, modify the Security Options.

  4. From the local computer policy, modify the User Rights Assignment.

Answer: D Explanation:

Shut down the system

Computer Configuration\Windows Settings\Security Settings\Local Policies\User Rights Assignment Description Determines which users logged on locally to the computer can shut down the operating system using the Shut Down command. This user right is defined in the Default Domain Controller Group Policy object (GPO) and in the local security policy of workstations and servers.

Dumps4Cert 2018 PDF and VCE

Question No: 245 – (Topic 3)

You have a computer that runs Windows 7.

Windows Backup is configured to store backups on an external drive. You create a new NTFS volume on the computer.

You need to configure Windows Backup to include the files on the new volume as part of regularly scheduled backups.

What should you do?

  1. From Backup and Restore, select Change settings.

  2. From Backup and Restore, select Create a system image.

  3. From the System Protection tab, create a restore point.

  4. From the System Protection tab, enable system protection for the new volume.

Answer: A Explanation:

Backups are configured and scheduled by using the Backup And Restore console under System And Security in Control Panel.

The Change Settings option is not available unless you have configured a backup schedule and performed a backup.

Question No: 246 – (Topic 3)

You deploy a custom image to a computer and discover that the Telnet Client feature is disabled.

You need to ensure that the Telnet Client feature is enabled when you deploy the image. You must achieve this goal in the minimum amount of time.

What should you do?

  1. Enable the Telnet Client feature on the computer. Generalize the computer and capture the image.

  2. Create an unattended file that enables Telnet Client. Generalize the computer and specify the unattended file. Capture the image.

  3. Mount the image. Run Ocsetup.exe TelnetClient. Commit the changes and unmount the image.

  4. Mount the image. Run Dism.exe and specify /image and /enable-feature:TelnetClient switches. Commit the changes and unmount the image.

Answer: D Explanation:

NOTE: quot;when you deploy the image.quot; Implies for future installations, not the current one. Therefore the imagefile must be updated.

Dism Deployment Image Servicing and Management (DISM) is a command-line tool used to service Windows庐 images offline before deployment. You can use it to install, uninstall, configure, and update Windows features, packages, drivers, and international settings.

Subsets of the DISM servicing commands are also available for servicing a running operating system. Windows 7 introduces the DISM command-line tool. You can use DISM to service a Windows image or to prepare a Windows PE image. DISM replaces Package Manager (Pkgmgr.exe), PEimg, and Intlcfg in Windows Vista, and includes new features to improve the experience for offline servicing. You can use DISM to perform the following actions:

  • Prepare a Windows PE image.

  • Enable or disable Windows features within an image.

  • Upgrade a Windows image to a different edition.

  • Add, remove, and enumerate packages.

  • Add, remove, and enumerate drivers.

  • Apply changes based on the offline servicing section of an unattended answer file.

  • Configure international settings.

  • Implement powerful logging features.

  • Service operating systems such as Windows Vista with SP1 and Windows Server 2008.

  • Service a 32-bit image from a 64-bit host and service a 64-bit image from a 32-bit host.

  • Service all platforms (32-bit, 64-bit, and Itanium).

  • Use existing Package Manager scripts.

Question No: 247 – (Topic 3)

You have an offline virtual hard disk (VHD) that contains an installation of Windows 7 Home Premium.

You need to upgrade the installation to Windows 7 Ultimate by using the minimum amount of administrative effort.

What should you do?

  1. From a computer that runs Windows 7, attach the VHD. Run Imagex.exe and specify the

    /apply parameter.

  2. From a computer that runs Windows 7, attach the VHD. Run Dism.exe and specify the

    /set-edition parameter.

  3. Deploy the VHD to a new computer and upgrade the computer to Windows 7 Ultimate. Run Dism.exe and specify the /image parameter.

  4. Deploy the VHD to a new computer and upgrade the computer to Windows 7 Ultimate. Run Imagex.exe and specify the /capture parameter.

Answer: B Explanation: Dism

Deployment Image Servicing and Management (DISM) is a command-line tool used to service Windows庐 images offline before deployment. You can use it to install, uninstall, configure, and update Windows features, packages, drivers, and international settings. Subsets of the DISM servicing commands are also available for servicing a running operating system. Windows 7 introduces the DISM command-line tool. You can use DISM to service a Windows image or to prepare a Windows PE image. DISM replaces Package Manager (Pkgmgr.exe), PEimg, and Intlcfg in Windows Vista, and includes new features to improve the experience for offline servicing.

You can use DISM to perform the following actions:

  • Prepare a Windows PE image.

  • Enable or disable Windows features within an image.

  • Upgrade a Windows image to a different edition.

  • Add, remove, and enumerate packages.

  • Add, remove, and enumerate drivers.

  • Apply changes based on the offline servicing section of an unattended answer file.

  • Configure international settings.

  • Implement powerful logging features.

  • Service operating systems such as Windows Vista with SP1 and Windows Server 2008.

  • Service a 32-bit image from a 64-bit host and service a 64-bit image from a 32-bit host.

  • Service all platforms (32-bit, 64-bit, and Itanium).

  • Use existing Package Manager scripts.

Use the /Set-Edition option without the /ProductKey option to change an offline Windows image to a higher edition. Use /Get-TargetEditions to find the edition ID. Use the /Set- Edition option with the /ProductKey option only to change a running Windows Server庐 2008 R2 operating system to a higher edition.

Question No: 248 – (Topic 3)

Your network has a main office and a branch office.

The branch office has five client computers that run Windows 7 and a server that runs Windows Server 2008 R2. The branch office server is enabled for BranchCache.

You need to configure Windows Firewall on each client computer so that cached content can be retrieved from the branch office server.

Which firewall rule should you enable on the client computers?

  1. BranchCache – Content Retrieval (Uses HTTP)

  2. BranchCache – Hosted Cache Server (Uses HTTPS)

  3. BranchCache – Peer Discovery (Uses WSD)

  4. File and Printer Sharing

Answer: A Explanation:

Configure domain member client distributed cache mode firewall rules

When you configure BranchCache in distributed cache mode, BranchCache client computers use the Hypertext Transfer Protocol (HTTP) for data transfer with other client computers. BranchCache client computers also use the Web Services Dynamic Discovery (WS-Discovery) protocol when they attempt to discover content on client cache servers.

You can use this procedure to configure client firewall exceptions to allow incoming HTTP and WS-Discovery traffic on client computers that are configured for distributed cache mode. The BranchCache – Content Retrieval (Uses HTTP) predefined rule. If this rule is not available, create rules that allow inbound and outbound traffic on TCP port 80. This rule

is required for both Hosted Cache and Distributed Cache mode. The BranchCache – Peer- Discovery (Uses WSD) predefined rule. If this rule is not available, create rules that allow inbound and outbound traffic on UDP port 3702. This rule is only required when using Distributed Cache mode. The BranchCache – Hosted Cache Client (HTTPS-Out) predefined rule. It this rule is not available, configure a rule that allows outbound traffic on TCP port 443. This rule is required only when using Hosted Cache mode.

Question No: 249 – (Topic 3)

You need to modify the contents of an image that is contained in a Windows image (WIM) file.

What should you do first?

  1. Run Diskpart /s.

  2. Run Peimg.exe /import.

  3. Create an empty folder on a NTFS partition.

  4. Create and attach a virtual hard disk (VHD).

Answer: C

Question No: 250 – (Topic 3)

You have a computer that contains the folders shows in the following table.

Dumps4Cert 2018 PDF and VCE

You accidentally delete the Data1 folder.

You need to restore the contents of the Data1 folder. The solution must not overwrite any changes to the Data2 folder.

What should you do?

  1. From Recovery, restore a system restore point.

  2. From the Previous Versions tab of the User1 folder, click Copy.

  3. From the Sharing tab of the User1 folder, modify the Caching settings.

  4. Start the computer and then press F8. Restore the Last Known Good Configuration.

Answer: B

Explanation: Copy from Previous Versions allows the data to be returned to a user detailed location.

Dumps4Cert 2018 PDF and VCE

The Previous Versions tab, showing some previous versions of files

NOT Recovery:Would affect Data2NOT Sharing:Modifying Caching settings wont help.NOT Last Known Good Configuration:Extreme overkill and would affect Data2

100% Dumps4cert Free Download!
Download Free Demo:70-680 Demo PDF
100% Dumps4cert Pass Guaranteed!
70-680 Dumps

Dumps4cert ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
PDF VCE Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No

Leave a Reply

Your email address will not be published. Required fields are marked *