[Free] 2018(May) EnsurePass Examcollection Microsoft 70-384 Dumps with VCE and PDF 51-60

Ensurepass.com : Ensure you pass the IT Exams
2018 May Microsoft Official New Released 70-384
100% Free Download! 100% Pass Guaranteed!

Recertification for MCSE: Communication

Question No: 51 – (Topic 5)

You need to identify the dial-in conferencing configurations required to meet the technical requirements for the sales department.

Which two configurations should you identify? (Each correct answer presents part of the solution. Choose two.)

  1. Create a user-level conferencing policy. Assign the conferencing policy to the sales department users.

  2. Create a user-level dial plan. Assign the dial plan to the sales department users.

  3. Create a new dial-in access number. Assign the dial-in access number to a dial-in conferencing region.

  4. Create a user-level voice policy. Assign the voice policy to the sales department users.

  5. Create a new meeting configuration. Assign the meeting to a site.

Answer: B,C Explanation:

Note:

  • The sales department must have a dedicated dial-in conferencing number. All other users in both the United States and Europe must use a pool of regional dial-in conferencing numbers.

  • Question No: 52 DRAG DROP – (Topic 5)

    You need to identify the cause of the authentication issue for the pilot users.

    Which four actions should you perform in sequence? (To answer, move the appropriate four actions from the list of actions to the answer area and arrange them in the correct order.)

    Ensurepass 2018 PDF and VCE

    Answer:

    Ensurepass 2018 PDF and VCE

    Explanation:

    Box 1: Update-CsClsLogging Box 2: Run Start-CsClsLogging Box 3: Run Stop-CsClsLogging

    Box 4: Open the log file by running snooper.exe.

    Note:

    * From scenario:

    / Before deploying Lync Server 2013 and migrating the users to Lync Server 2013, you implement a small pilot project to test the functionality of Lync Server 2013.

    / Problem Statements

    The users in the pilot report that occasionally, they cannot sign in to Lync 2013.

    • Start-CsClsLogging

      Starts the specified scenario centralized logging service scenario. Centralized logging provides a way for administrators to simultaneously enable or disable Lync Server 2013 tracing on multiple computers.

    • set-CsClsRegion

      Modifies an existing centralized logging configuration region. Centralized logging provides a way for administrators to simultaneously enable or disable event tracing on multiple computers.

    • Update-CsClsLogging

      Updates the duration time for all active centralized logging scenarios.

    • (incorrect) Search-CsClsLogging

      Provides a command-line option for searching the centralized logging service log files.

    • The centralized logging service (which replaces the OCSLogger and OCSTracer tools used in Microsoft Lync Server 2010) provides a way for administrators to manage logging and tracing for all computers and pools running Lync Server 2013. Centralized logging enables administrators to stop, start, and configure logging for one or more pools and computers by using a single command;

    Question No: 53 – (Topic 5)

    You need to identify the minimum number of Lync Server 2013 servers and supporting server roles required in each Lync site to meet the business goals and the technical requirements.

    How many servers should you identify? (To answer, select the appropriate number servers in the answer area.)

    Ensurepass 2018 PDF and VCE

    1. Edge Servers per site: 0

    2. Edge Servers per site: 1

    3. Edge Servers per site: 2

    4. Edge Servers per site: 3

    5. Front End Servers per site: 0

    6. Front End Servers per site: 1

    7. Front End Servers per site: 2

    8. Front End Servers per site: 3

    9. Office Web Apps servers per site: 0

    10. Office Web Apps servers per site: 1

    11. Office Web Apps servers per site: 2

    12. Office Web Apps servers per site: 3

    13. Microsoft SQL Servers per site: 0

    14. Microsoft SQL Servers per site: 1

    15. Microsoft SQL Servers per site: 2

    16. Microsoft SQL Servers per site: 3

    Answer: C,H,K,P Explanation:

    ->Contoso must minimize hardware and software purchasing costs, while

    guaranteeing performance levels for all Lync Server 2013 workloads.

    ->If a single component fails, all Lync services must remain available without the need for manual intervention. Performance degradation is acceptable during a component failure state.

    For the number of users, 3 FE servers are required. In the event of a failure, one server could not handle 15,000 users.

    SQL mirroring is the recommended database HA solution in Lync 2013. To avoid manual intervention, you need a third server to act as a witness server. You could use a failover cluster using two servers but this tends to be more expensive in terms of hardware cost.

    Question No: 54 – (Topic 5)

    You need to identify the minimum number of required public IP addresses for each Lync Server 2013 component. The solution must meet the business goals and the technical requirements.

    How many public IP addresses should you identify for each component? (To answer, select the appropriate number of public IP addresses for each component in the answer area.)

    Ensurepass 2018 PDF and VCE

    Select four.

    1. Edge server: 0

    2. Edge server: 1

    3. Edge server: 2

    4. Edge server: 3

    5. Hardware load balancer: 0

    6. Hardware load balancer: 1

    7. Hardware load balancer: 2

    8. Hardware load balancer: 3

    9. Web component: 0

    10. Web component: 1

    11. Web component: 2

    12. Web component: 3

    13. Office Web Apps: 0

    14. Office Web Apps: 1

    15. Office Web Apps: 2

    16. Office Web Apps: 3

    Answer: D,H,J,N Explanation:

    ->Each Internet-facing service must have one or more dedicated public IP addresses

    Question No: 55 HOTSPOT – (Topic 5)

    You need to configure the required external DNS record to support federation. The solution must meet the business goals and the technical requirements.

    How should you configure the DNS record? (To answer, select the appropriate options for the DNS record in the answer area.)

    Ensurepass 2018 PDF and VCE

    Answer:

    Ensurepass 2018 PDF and VCE

    Topic 6, Mix Questions

    Question No: 56 HOTSPOT – (Topic 6)

    You plan to deploy a Lync Server 2013 infrastructure that will contain the components shown in the following table.

    Ensurepass 2018 PDF and VCE

    The fully qualified domain name (FQDN) of the Enterprise Edition pool will be Lyncpool01.contoso.com. Lync web services will be accessed at a URL of https://lyncweb01.contoso.com.

    You plan to use DNS load balancing for the Enterprise Edition pool.

    You need to identify which host (A) records must be created on the internal DNS servers to support the planned Lync Server 2013 deployment.

    Which A record entries should you identify?

    To answer, select the appropriate records in the answer area.

    Ensurepass 2018 PDF and VCE

    Answer:

    Ensurepass 2018 PDF and VCE

    Explanation:

    Ensurepass 2018 PDF and VCE

    Note: Before you can use DNS load balancing, you must do the following:

    ->uk.co.certification.simulator.questionpool.PList@2780c510

    Question No: 57 HOTSPOT – (Topic 6)

    Your company has two main offices. The main offices are located in Tokyo and Athens. The network contains an Active Directory forest named contoso.com.

    The offices connect to each other by using a WAN link. Each office connects directly to the Internet.

    You plan to deploy a Lync Server 2013 infrastructure that has federation enabled.

    You need to recommend a Lync Server 2013 topology for the planned deployment. The solution must ensure that each office uses its local Internet connection for federated communications with the company#39;s external partners.

    What is the minimum number of Edge Servers, Federation routes, SIP domains, and Sites that you should you recommend?

    To answer, select the appropriate number of Edge Servers, Federation routes, SIP domains, and Sites in the answer area.

    Ensurepass 2018 PDF and VCE

    Ensurepass 2018 PDF and VCE

    Answer:

    Ensurepass 2018 PDF and VCE

    Explanation:

    Edge servers: 2

    Federation Routes: 2

    SIP Domains: 1

    Sites: 2

    Question No: 58 DRAG DROP – (Topic 6)

    You have a Lync Server 2013 infrastructure that contains two servers. The servers are configured as shown in the following table.

    Ensurepass 2018 PDF and VCE

    You deploy a new server named lync3.contoso.com. You plan to install the Edge Server role on Lync3.

    You need to identify which tasks must be performed to install the Edge Server role on Lync3.

    Which four actions should you identify?

    To answer, move the four appropriate actions from the list of actions to the answer area and arrange them in the correct order.

    Ensurepass 2018 PDF and VCE

    Answer:

    Ensurepass 2018 PDF and VCE

    Explanation: Box 1:

    Ensurepass 2018 PDF and VCE

    Box 2:

    Ensurepass 2018 PDF and VCE

    Box 3:

    Ensurepass 2018 PDF and VCE

    Box 4:

    Ensurepass 2018 PDF and VCE

    Note:

    You install Lync Server 2013 on Edge Servers by using Lync Server Deployment Wizard. By running the Deployment Wizard on each Edge Server, you can complete most of the tasks required to set up the Edge Server. In order to deploy Lync Server 2013 on an Edge Server, you must have already run Topology Builder (see note 2 below) to define and publish your Edge Server topology, and exported it to media that is available from the Edge Server.

    To install an Edge Server

    ->Log on to the computer on which you want to install your Edge Server as a member of the local Administrators group or an account with equivalent user rights and permissions.

    ->Ensure that the topology configuration file you created using Topology Builder, and then exported and copied to external media, is available on the Edge Server (for example, access to the USB drive onto which you copied the topology configuration file, or verify access to the network share where you copied the file).

    ->Start the Deployment Wizard.

    ->In the Deployment Wizard, click Install or Update Lync Server System.

    ->After the wizard determines the deployment state, for Step 1. Install Local Configuration Store, click Run and then do the following:

    • In the Configure Local Replica of Central Management Store dialog box, click Import from a file (Recommended for Edge Servers), go to the location of the exported topology configuration file, select the .zip file, click Open, and then click Next.

    • The Deployment Wizard reads the configuration information from the configuration file and writes the XML configuration file to the local computer.

    • After the Executing Commands process is finished, click Finish. Etc.

    Note 2: To define the topology for a single Edge Server

    ->Start Topology Builder: Click Start, click All Programs, click Microsoft Lync Server 2013, and then click Lync Server Topology Builder.

    ->In the console tree, expand the site in which you want to deploy an Edge Server.

    ->Right-click Edge pools, and then click New Edge Pool.

    ->In Define the New Edge Pool, click Next.

    ->In Define the Edge pool FQDN,

    Note 3: Export-CsConfiguration

    Exports your Lync Server topology, policies, and configuration settings to a file. Among other things, this file can then be used to restore this information to the Central Management store after an upgrade, a hardware failure, or some other issue has resulted in data loss. This cmdlet was introduced in Lync Server 2010.

    Question No: 59 – (Topic 6)

    You have two servers named Lync1 and Lync2 that have Lync Server 2013 Standard Edition deployed. The servers are located in different buildings. Lync1 hosts response groups.

    You need to ensure that Lync2 can host the response groups if Lync1 fails.

    Which cmdlet should you run first?

    1. Export-CsConfiguration

    2. Export-CsRgsConfiguration

    3. Backup-CsPool

    4. Move-CsRgsConfiguration

    Answer: B

    Explanation: http://technet.microsoft.com/en-us/library/jj205011.aspx Reference: Export-CsRgsConfiguration

    Untitled

    Export-CsRgsConfiguration

    Detailed Description

    The Export-CsRgsConfiguration cmdlet and the Import-CsRgsConfiguration cmdlet enable you to export data about your current implementation of the Response Group application (including such things as workflows, queues, agent groups, holiday sets and business hours, as well as audio files and service configuration settings) and then later import (or re-import) that information. This can be extremely useful in a disaster recovery scenario (for example, in a case where the server hosting the Response Group application has failed) or if you simply need to transfer the Response Group application to a different pool.

    Note that the Export-CsRgsConfiguration cmdlet and the Import-CsRgsConfiguration

    cmdlet are designed to work only with Lync Server 2013.

    If you want to migrate Response Group data from Microsoft Lync Server 2010 to Lync Server 2013, you should use the Move-CsRgsConfiguration cmdlet instead.

    Export-CsRgsConfiguration -Source quot;ApplicationServer:atl-rgs-001.litwareinc.comquot; – FileName quot;C:\Exports\Rgs.zipquot;

    To return a list of all the role-based access control (RBAC) roles this cmdlet has been assigned to (including any custom RBAC roles you have created yourself), run the following command from the Windows PowerShell command-line interface prompt:

    Get-CsAdminRole | Where-Object {$_.Cmdlets -match quot;Export-CsRgsConfigurationquot;} Lync Server Control Panel: The functions carried out by the Export-CsRgsConfiguration

    cmdlet are not available in the Lync Server Control Panel.

    Question No: 60 HOTSPOT – (Topic 6)

    Your network contains an Active Directory domain named contoso.com. The domain contains a Lync Server 2013 infrastructure that has the Persistent Chat feature configured.

    Persistent Chat is hosted by a Front End pool named pcpool.

    You need to configure a chat room named Announcements to meet the following requirements:

    ->Only a user named user1@contoso.com can post messages to Announcements.

    ->Users from a group named group1 can view the messages in Announcements.

    What should you run? (To answer, configure the appropriate parameters for the PowerShell command in the answer area.)

    Ensurepass 2018 PDF and VCE

    Answer:

    Ensurepass 2018 PDF and VCE

    Explanation:

    Box 1: -Presenters

    Box 2: -Type Auditorium

    100% Ensurepass Free Download!
    Download Free Demo:70-384 Demo PDF
    100% Ensurepass Free Guaranteed!
    Download 2018 EnsurePass 70-384 Full Exam PDF and VCE

    EnsurePass ExamCollection Testking
    Lowest Price Guarantee Yes No No
    Up-to-Dated Yes No No
    Real Questions Yes No No
    Explanation Yes No No
    PDF VCE Yes No No
    Free VCE Simulator Yes No No
    Instant Download Yes No No

    Leave a Reply

    Your email address will not be published. Required fields are marked *